BuildAR Support Forum

Support => FAQ => Topic started by: buildaradmin on September 05, 2011, 04:02:17 pm

Title: How to disable the HIT Lab NZ logo at the right bottom corner on the screen?
Post by: buildaradmin on September 05, 2011, 04:02:17 pm
To disable the logo, click on "Scene" in the tree on the left hand side of the interface. It's the root element. A small configuration panel will appear in the bottom left where you can enable/disable the logo, or select an alternative logo. The settings here are per-scene, meaning you can select a different logo for each scene, or whether the scene shows a logo at all.